Skip to content

Free water test, then the right new system installed: (512) 812-9374

(512) 812-9374
Technician's hands adjusting a red-handled valve on white PEX lines above a slim blue conditioner tank against a garage wall, with a tool bag and boxes nearby

ServicesSalt-Free Water Conditioners

Salt-Free Water Conditioners in Round Rock

A salt-free conditioner changes how hardness minerals behave instead of removing them, so calcium stays in the water rather than baking onto heater elements and faucet aerators. There are no salt bags, no brine discharge and no drain line. We test your water first and tell you plainly whether it fits.

How a salt-free conditioner works, and when it is the right call

Most salt-free conditioners use template assisted crystallization, or TAC. Water flows up through a tank of coated ceramic beads, and the bead surfaces convert dissolved calcium and magnesium into microscopic crystals. Those crystals stay suspended and pass through your plumbing instead of bonding to hot surfaces as hard scale. The minerals are still in the water. They just stop building up on tank walls, heating elements and valve seats.

That makes a conditioner a good fit when your main problem is scale and you do not want to haul salt, run a regeneration cycle or send brine down the drain. The limestone geology around Central Texas gives a lot of homes water hard enough for scale to matter, and a conditioner handles it with very little upkeep.

It is not the right tool for every house. If you want water that feels slick in the shower or spot-free glassware, a conventional water softener does that and a conditioner does not. If your test shows iron or manganese above what TAC media tolerates, those need to come out first. We explain which situation you are in before you spend anything.

What the installation includes

A water test before sizing
We check hardness, iron, manganese, chlorine and pH at your tap. TAC media is sensitive to iron and manganese, so those numbers decide whether a conditioner is even a sound choice.
Sediment prefilter
A cartridge filter goes ahead of the conditioner tank to catch sand, pipe scale and debris. Without it, particles coat the beads and cut their ability to form crystals.
Enough media for your busiest hour
The beads only form crystals when water stays in contact with them long enough. We work out the most water your fixtures draw at once, such as two showers and the washer running together, and choose a tank holding enough media to keep that contact time. The number of bedrooms or square feet alone does not tell us that.
Bypass valve and clean plumbing tie-in
A bypass at the main line, either a three-valve loop or one built into the head, lets water route around the tank during service while every faucet in the house keeps running. We match fittings to the pipe you already have, whether copper, PEX or CPVC.
Free installation
Installation is free when you choose a system with us. Your quote by phone covers the equipment and any plumbing parts your setup needs.
Startup and cleanup
We flush the new media, check every joint for leaks under pressure and clean up the work area before we leave.

Signs scale is costing you

  • White crust on fixtures

    Chalky buildup on faucet aerators, shower heads and the base of your tub spout is calcium carbonate left behind as water evaporates or heats.

  • A water heater that pops or rumbles

    Scale settles on the tank floor and traps small pockets of water beneath it. When the burner or element fires, those pockets boil into steam bubbles, and that is the noise you hear. The same crust insulates the heat source from the water, so heating it costs more.

  • Weak flow from shower heads

    Small spray nozzles clog with mineral deposits first. If cleaning them with vinegar helps for a few weeks and then the flow drops again, scale is forming faster than you can remove it.

  • Short appliance life

    Dishwasher heating elements, ice maker valves and tankless heater heat exchangers all fail early when scale coats them.

  • An older system that no longer keeps up

    If crust keeps coming back with an older system in place, a free water test shows whether a new salt-free conditioner fits your water. It prevents scale only and does not soften, and we install it new.

How the job runs

  1. 1

    Free water test and walk-through

    We test your water and look at where the main line enters your home, the space available and your water heater.

  2. 2

    A straight recommendation

    You hear whether a new salt-free conditioner or a different system makes sense, and why. A conditioner prevents scale but does not soften. If iron is too high or you want softened water, we say so and point you to iron and sulfur removal or water softener installation instead.

  3. 3

    Installation day

    Water is shut off for a few hours while we cut into the main line, set the prefilter, tank and bypass, and make the connections. Most installs are finished the same visit.

  4. 4

    Flush, pressure check and handoff

    We flush loose fines out of the new media, run water through every fixture and walk you through the bypass and the prefilter change so you know how to handle routine upkeep.

Technician in gloves kneels beside a tan brick house, filling a sample bottle from an outdoor hose bib next to blue softener tanks and filter housings

What moves the cost

A salt-free conditioner has fewer moving parts than a softener, so the price depends mostly on the tank and the plumbing around it. Installation itself is free. We size the new conditioner from your water test, and the quote lists the tank, prefilter and plumbing parts so you can see the total.

Tank size and media volume
A home with three or more bathrooms needs more TAC media to hold contact time at peak flow, and a larger tank costs more.
Prefiltration needs
Most homes need only a sediment cartridge. If chlorine is high, a carbon stage may be added to protect the media, which adds a housing and cartridges.
Plumbing at the main line
Easy access in a garage keeps parts simple. Tight spaces, an exterior loop that needs rerouting or older galvanized pipe add fittings and time.
Replacing an older unit
When a new conditioner takes the place of an old system, we remove the old tank and adjust the plumbing at the main line, which can add a few fittings and some time.

Salt-free conditioner questions

Something not covered here? (512) 812-9374

Will my water still test hard after the install?

Yes. A conditioner does not remove calcium or magnesium, so a hardness test strip will read about the same. What changes is that the minerals stop forming scale on hot surfaces. If you need soft water by the numbers, a water softener is the right system.

Do I still get water spots on glasses and shower doors?

Usually some, yes. When water evaporates, the minerals are left behind whether or not they were conditioned. The spots tend to wipe off more easily than hard-water spots, but a conditioner is a scale control system, not a spot-free one.

How long does the TAC media last?

TAC media lasts several years in most homes, depending on how much water you use and how clean the incoming water is. The sediment prefilter needs changing far more often, and keeping up with it is the main thing that protects the media. When performance drops, we check the prefilter and media before talking about a new unit.

Can you replace my old conditioner with a new one?

Yes. We test your water first, then remove the old unit and install a new salt-free conditioner sized to your peak flow. Keep in mind it prevents scale only and does not soften the water. If your test shows you need soft water or iron removal, we tell you that instead.

Is this safe for a tankless water heater?

Scale is one of the main reasons tankless heat exchangers fail, so controlling it helps. Check your heater's manual for its water quality requirements, and we can look at those with you during the free water test to confirm a conditioner meets them.

Find out if salt-free is right for your water

We test your water at no charge and tell you plainly whether a new salt-free conditioner fits. It prevents scale but does not soften. Installation is free if you go ahead.